Tools Recommended:

- 8mm Open-end Wrench 

- #2 Phillips-head Screwdriver

Instructions:

In this tutorial, we will guide you through the process of adjusting the speed limiter for VK. Follow these steps to customize your VK's maximum speed for optimal performance.

Step 1: Loosen the Nut with an 8mm Wrench

Using an 8mm wrench, gently loosen the nut connected to the speed limit screw. Ensure that the screw is easily movable before proceeding to the next step.

Step 2: Adjust the Screw Length with a #2 Phillips Screwdriver

Using a #2 Phillips screwdriver, adjust the length of the speed limit screw. The longer the screw is, the higher the maximum speed. Conversely, a shorter screw length will result in a lower maximum speed. Take into consideration the specific requirements of your motorcycle.

Step 3: Secure the Screw by Tightening the Nut with an 8mm Wrench

While holding the screw steady, use an 8mm wrench to firmly tighten the nut. This will ensure that the adjusted position of the speed limit screw remains unchanged during operation.

Video applicable to products:

VK(VK)