Video Guide

Tools Required:

- Open-end wrench 12mmx14mm
- Hexagon wrench M4
- Hexagon wrench M5

Step 1 Remove seat

Remove the screw under the seat and then you can remove the seat easily.

Step 2 

Remove 3 bolts wiht a hexagon wrench M5

Step 3 

Remove 6 bolts wiht a hexagon wrench M4

Step 4 

Disconnect the 2 tubes with a cliper and then remove the oil tank

Step 5 

Replace the oil tank and then re-assemble bolts and screws

Video applicable to products:

PAD50-1P
PAD50-1Z