Maitainance & Repairs
Instructions: Tools Required: A #10 wrench A #8 allen wrench A new gearbox STEP 1: Use the #8 wrench to remove the 4 screws securing the gearbox Use ...
Tue, May 30, 2023 at 2:46 AM
Instructions : 1.Loosen the rear axle nut. 2.Remove the chain guard. 3.Loosen the brake fixed pad. 4.Loosen the chain adjuster. 5.Take the rear tir...
Thu, May 18, 2023 at 11:36 PM
Instructions: 1.Unscrew bolts for the plastic covers and the seat and the remove them. 2.Remove the fuel tank cap, fuel pipes and 2 screws securing the fue...
Thu, May 18, 2023 at 11:47 PM
Instructions : 1.Open the box. 2.Take everything out. 3.Install the rear shock absorber and tight the bolt. 4.Install the handle bar, and tight the b...
Thu, May 18, 2023 at 11:20 PM
Instructions : Prepare everything you need to assemble the tyre Slide the new wheel into the fork and insert the axle bolt. Put spacers between the whe...
Thu, Jun 8, 2023 at 7:35 PM
Instuctions: Remove the seat to gain access to the battery compartment Position the new battery in the battery compartment, making sure that it aligns wi...
Wed, Apr 19, 2023 at 7:37 PM
Video aslo applicable to those models: PAD50-1 PAD50-2 PAD50-3
Sun, May 22, 2022 at 10:00 PM
A stable idle speed is important to prevent engine from turning off. Instructions Check this to know How to Adjust Idle Speed for SXY MOTO Holeshot...
Tue, May 24, 2022 at 7:59 PM
How to change the clutch Instruction applied to those models: PAD50-1, PAD50-2, PAD50-3, PAD50-8, How to change the clutch Instruction appli...
Mon, May 23, 2022 at 9:34 PM