Instructions:

1.Unscrew bolts for the plastic covers and the seat and the remove them.
2.Remove the fuel tank cap, fuel pipes and 2 screws securing the fuel tank in place.
3.Replace the fuel tank.
4.Install the new fuel tank. Screw in the bolt in the front, put the tank in place, then screw in and tighten the bolt in the back, and finally tighten bolt in the front.
5.Insert the fuel pipes back, making sure the two pipes are parallel to each other.
6.Install the fuel tank cap.
7. Reassemble the plastic covers. 

Video:

Applicable to products:

MT-2