How to Assemble MT-2 40cc 4-Stroke Mini Dirt Bike Print

Modified on: Thu, May 18, 2023 at 11:20 PM

Instructions :

1.Open the box.

2.Take everything out.

3.Install the rear shock absorber and tight the bolt.

4.Install the handle bar, and tight the bolt.

5.Install the front tire. Do not forget the two spacers.

6.Install the front fender and number plate.

7.Secure the plastic cover with the included screws.

8.Install the anti-leak hose.

9.Adjust and tight the throttle and brake, make sure that the throttle limit screw does not interfere with the brake.

MT-2

Did you find it helpful? Yes No