SYX MOTO Support Center

Instructions:  1. Remove the bolts.  2. Remove the chain cover.  3. Install the training wheels.  4. Ensure that the bolts and screws are properly tight...

Instructions:  1. Put the front suspension on the bike frame.  2. Tighten up the bolts.  3. Ensure the bolts are tightened up. Video Instruction:  

Instructions:  1. Before the installation, pull slightly to check if the pull starter is functional.  2. Ensure tightened up.  3. Gently pull to check. ...

Tools Required: 4mm Allen Wrench 5mm Allen Wrench 14mm Wrench Instructions: Step 1: Using the 14mm wrench, loosen the nut located at the rear...

Video Instructions The air filter need regular clean, please follow these steps: Step 1:Remove the black tube connected to the air filter and al...

Instructions: How to Check the Engine Oil Level of VK 58CC 4-Stroke Dirt Bike Applicable to products: VK Oil Type: 15W/30（L-HM 68#）or ot...

Instructions: Tools Required:  A #10 wrench A #8 allen wrench A new gearbox  STEP 1: Use the #8 wrench to remove the 4 screws securing the gearbox  Use ...

Instructions : 1.Loosen the rear axle nut.  2.Remove the chain guard.  3.Loosen the brake fixed pad.  4.Loosen the chain adjuster.  5.Take the rear tir...

Instructions : 1.Open the box.  2.Take everything out.  3.Install the rear shock absorber and tight the bolt.  4.Install the handle bar, and tight the b...

Instructions: 1.Unscrew bolts for the plastic covers and the seat and the remove them. 2.Remove the fuel tank cap, fuel pipes and 2 screws securing the fue...