Maitainance & Repairs
Instructions : Prepare everything you need to assemble the tyre Slide the new wheel into the fork and insert the axle bolt. Put spacers between the whe...
Thu, Jun 8, 2023 at 7:35 PM
Instuctions: Remove the seat to gain access to the battery compartment Position the new battery in the battery compartment, making sure that it aligns wi...
Wed, Apr 19, 2023 at 7:37 PM
Instructions: Remove the old caliper with an allen key Install a new caliper: -take a new caliper and align it with the mounting holes on the bike...
Thu, Apr 6, 2023 at 3:11 AM
Instructions: Remove the old caliper with an allen key Install a new caliper: -take a new caliper and align it with the mounting holes on the bike'...
Tue, Apr 4, 2023 at 2:01 AM
Instructions How to Adjust Idle Speed for MT Series 40cc 4-stroke Dirt Bikes？ This is the engine and this is the carburetor This is the idle adjustment scr...
Thu, Apr 6, 2023 at 3:11 AM
Video Guide Tools Required: - Open-end wrench 12mmx14mm - Hexagon wrench M4 - Hexagon wrench M5 Step 1 Remove seat Remove the screw under the ...
Mon, Nov 7, 2022 at 1:07 AM
Video Video applicable to products: PAD50-1 PAD50-2 PAD50-3 PAD50-8 PPB50-1P PPB50-1ES
Mon, Aug 22, 2022 at 3:55 AM
Video Procedure Tools necessary： -spark plug wrench, -4millimeter allen wrench or socket -needle nose pliers, Parts needed: -ignition coil...
Wed, Jul 13, 2022 at 12:11 AM
Video 1 Remove the pull starter ---Remove the pull starter housing (3, 4mm allen head screws) ---Disconnect ignition coil wire. *When the...
Fri, Jun 10, 2022 at 8:17 AM
Tools Required for Assembly: A pull starter #2 Phillips head screwdriver Instruction: 1. Remove the 4 screws on the pull start housing then remov...
Thu, Jul 6, 2023 at 2:23 AM